GATE 2015 ME Set 1 · Question 46
The solidification time of a casting is proportional to , where is the volume of the casting and is the total casting surface area losing heat. Two cubes of same material and size are cast using sand casting process. The top face of one of the cubes is completely insulated. The ratio of the solidification time for the cube with top face insulated to that of the other cube is
- A
- B
- C
- D
GATE 2015 · Mechanical Engineering · Set 1 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
According to Chvorinov's rule, the solidification time of a casting is given by:
where is the volume and is the total surface area through which heat is dissipated.
Let the side length of each cube be .
- For the uninsulated cube (Case 1), all 6 faces dissipate heat:
- For the cube with its top face completely insulated (Case 2), only 5 faces lose heat:
The ratio of the solidification time of the insulated cube to that of the uninsulated cube is:
Answer: (B)
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2015 ME Set 2 · Q58A cube and a sphere made of cast iron (each of volume 1000 cm3) were cast under identical conditions. The…
- GATE 2015 ME Set 3 · Q17In full mould (cavity-less) casting process, the pattern is made of
- GATE 2015 ME Set 3 · Q42Ratio of solidification time of a cylindrical casting (height = radius) to that of a cubic casting of side…
- GATE 2015 ME Set 3 · Q60The dimensions of a cylindrical side riser (height = diameter) for a 25 cm × 15 cm × 5 cm steel casting are…
- GATE 2014 ME Set 1 · Q65An aluminium alloy (density 2600 kg/m3) casting is to be produced. A cylindrical hole of 100 mm diameter and…
- GATE 2014 ME Set 3 · Q32Match the casting defects (Group A) with the probable causes (Group B): | Group A | Group B | | :--- | :---…
Question from the official GATE 2015 ME paper (Set 1), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.