GATE 2015 ME Set 3 · Question 42
Ratio of solidification time of a cylindrical casting (height = radius) to that of a cubic casting of side two times the height of cylindrical casting is ______
GATE 2015 · Mechanical Engineering · Set 3 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
According to Chvorinov's rule, the solidification time of a casting is proportional to the square of its modulus (ratio of volume to surface area ):
For the cylindrical casting of radius and height :
For the cubic casting with side :
The ratio of the solidification times is:
Answer: 0.56
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2015 ME Set 3 · Q60The dimensions of a cylindrical side riser (height = diameter) for a 25 cm × 15 cm × 5 cm steel casting are…
- GATE 2014 ME Set 1 · Q65An aluminium alloy (density 2600 kg/m3) casting is to be produced. A cylindrical hole of 100 mm diameter and…
- GATE 2014 ME Set 3 · Q32Match the casting defects (Group A) with the probable causes (Group B): | Group A | Group B | | :--- | :---…
- GATE 2014 ME Set 3 · Q35The hot tearing in a metal casting is due to
- GATE 2014 ME Set 3 · Q62A cylindrical blind riser with diameter d and height h, is placed on the top of the mold cavity of a closed…
- GATE 2014 ME Set 4 · Q63A cylindrical riser of 6 cm diameter and 6 cm height has to be designed for a sand casting mould for…
Question from the official GATE 2015 ME paper (Set 3), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.