GATE 2015 ME Set 3 · Question 60
The dimensions of a cylindrical side riser (height = diameter) for a steel casting are to be determined. For the tabulated shape factor values given below, the diameter of the riser (in cm) is ________
| Shape factor | 2 | 4 | 6 | 8 | 10 | 12 |
| :--- | :---: | :---: | :---: | :---: | :---: | :---: |
| Riser volume/ Casting volume | 1.0 | 0.70 | 0.55 | 0.50 | 0.40 | 0.35 |
GATE 2015 · Mechanical Engineering · Set 3 · IIT Kanpur
Answer
From the official answer key published by IIT Kanpur.
Worked solution
The casting dimensions are , , and .
The shape factor of the casting is defined as:
From the provided table, for a shape factor of :
The casting volume is:
Thus, the required riser volume is:
For a cylindrical side riser with height equal to diameter ():
Equating to find :
Answer: 10.61 (range 10.5 to 10.7)
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2014 ME Set 1 · Q65An aluminium alloy (density 2600 kg/m3) casting is to be produced. A cylindrical hole of 100 mm diameter and…
- GATE 2014 ME Set 3 · Q32Match the casting defects (Group A) with the probable causes (Group B): | Group A | Group B | | :--- | :---…
- GATE 2014 ME Set 3 · Q35The hot tearing in a metal casting is due to
- GATE 2014 ME Set 3 · Q62A cylindrical blind riser with diameter d and height h, is placed on the top of the mold cavity of a closed…
- GATE 2014 ME Set 4 · Q63A cylindrical riser of 6 cm diameter and 6 cm height has to be designed for a sand casting mould for…
- GATE 2013 ME · Q16A cube shaped casting solidifies in 5 min. The solidification time in min for a cube of the same material,…
Question from the official GATE 2015 ME paper (Set 3), IIT Kanpur. Solutions by PARIXO AI. All 65 questions of this paper.