GATE 2014 ME Set 1 · Question 65
An aluminium alloy (density ) casting is to be produced. A cylindrical hole of diameter and length is made in the casting using sand core (density ). The net buoyancy force (in newton) acting on the core is _______
GATE 2014 · Mechanical Engineering · Set 1 · IIT Kharagpur · printed as Q.55 in the ME section
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
The net buoyancy force acting vertically upward on the core is the difference between the upward buoyant force exerted by the molten metal and the downward weight of the core:
where:
- is the volume of the sand core,
- is the density of the molten aluminium alloy,
- is the density of the sand core,
- is the acceleration due to gravity.
The volume of the cylindrical core with diameter and length is:
Substituting the values into the force equation:
Answer: 7.70 (acceptable range: 7 to 8)
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2014 ME Set 3 · Q32Match the casting defects (Group A) with the probable causes (Group B): | Group A | Group B | | :--- | :---…
- GATE 2014 ME Set 3 · Q35The hot tearing in a metal casting is due to
- GATE 2014 ME Set 3 · Q62A cylindrical blind riser with diameter d and height h, is placed on the top of the mold cavity of a closed…
- GATE 2014 ME Set 4 · Q63A cylindrical riser of 6 cm diameter and 6 cm height has to be designed for a sand casting mould for…
- GATE 2013 ME · Q16A cube shaped casting solidifies in 5 min. The solidification time in min for a cube of the same material,…
- GATE 2026 ME · Q30In relation to metal casting defects, match the following | Defect | | Description | | | :--- | :--- | :---…
Question from the official GATE 2014 ME paper (Set 1), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.