PARIXO GATE · ME Open the app

GATE 2014 ME Set 3 · Question 35

1 markMultiple choiceManufacturing EngineeringCasting: Patterns, Moulds, Gating and Solidification

The hot tearing in a metal casting is due to

  1. A

    high fluidity

  2. B

    high melt temperature

  3. C

    wide range of solidification temperature

  4. D

    low coefficient of thermal expansion

GATE 2014 · Mechanical Engineering · Set 3 · IIT Kharagpur · printed as Q.25 in the ME section

Answer
(C)

From the official answer key published by IIT Kharagpur.

Worked solution

Hot tearing (or hot cracking) is a casting defect characterized by internal or external cracks formed during the final stages of solidification when the metal is in a semi-solid or 'mushy' state. An alloy possessing a wide range of solidification temperature (freezing range) stays in this mushy, mechanically weak state for an extended duration. As thermal contraction is hindered by the mold or core, tensile stresses build up and tear apart the thin liquid films between dendritic boundaries.

Hence, a wide freezing range increases susceptibility to hot tears.

Answer: (C) wide range of solidification temperature

Practise Casting: Patterns, Moulds, Gating and Solidification

34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Casting: Patterns, Moulds, Gating and Solidification

Question from the official GATE 2014 ME paper (Set 3), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.