PARIXO GATE · ME Open the app

GATE 2016 ME Set 2 · Question 59

2 marksNumerical answerManufacturing EngineeringCasting: Patterns, Moulds, Gating and Solidification

Gray cast iron blocks of size with a central spherical cavity of diameter are sand cast. The shrinkage allowance for the pattern is . The ratio of the volume of the pattern to volume of the casting is ________

GATE 2016 · Mechanical Engineering · Set 2 · IISc Bangalore · printed as Q.49 in the ME section

Answer
1.08 to 1.1

From the official answer key published by IISc Bangalore.

Worked solution

Shrinkage allowance is applied as a linear expansion to the pattern dimensions to compensate for the contraction of the casting upon cooling.

Given a linear shrinkage allowance of , the linear dimension of the pattern is related to the casting dimension by:

Since the volume scales with the cube of the linear dimensions, the ratio of the volume of the pattern to the volume of the casting is:

The small spherical cavity ( compared to ) is formed by a core and contributes negligibly to the overall volume ratio:

Answer: 1.093

Practise Casting: Patterns, Moulds, Gating and Solidification

34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Casting: Patterns, Moulds, Gating and Solidification

Question from the official GATE 2016 ME paper (Set 2), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.