GATE 2017 ME Set 2 · Question 55
In an orthogonal machining with a tool of orthogonal rake angle, the uncut chip thickness is . The chip thickness fluctuates between and . The ratio of the maximum shear angle to the minimum shear angle during machining is ________
GATE 2017 · Mechanical Engineering · Set 2 · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
The shear angle in orthogonal machining is related to the rake angle and chip thickness ratio by:
Given:
- Orthogonal rake angle:
- Uncut chip thickness:
1. For minimum chip thickness (giving maximum and maximum ):
2. For maximum chip thickness (giving minimum and minimum ):
The ratio of the maximum to minimum shear angle is:
Answer: 1.49
Practise Mechanics of Orthogonal Metal Cutting
27 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Mechanics of Orthogonal Metal Cutting
- GATE 2016 ME Set 1 · Q34In an orthogonal cutting process the tool used has rake angle of zero degree. The measured cutting force and…
- GATE 2016 ME Set 3 · Q59For an orthogonal cutting operation, tool material is HSS, rake angle is 22°, chip thickness is 0.8 mm,…
- GATE 2015 ME Set 1 · Q45An orthogonal turning operation is carried out under the following conditions: rake angle = 5°; spindle…
- GATE 2015 ME Set 2 · Q62A single point cutting tool with 0° rake angle is used in an orthogonal machining process. At a cutting…
- GATE 2015 ME Set 3 · Q44Orthogonal turning of a mild steel tube with a tool of rake angle 10° is carried out at a feed of 0.14…
- GATE 2014 ME Set 1 · Q33The main cutting force acting on a tool during the turning (orthogonal cutting) operation of a metal is 400…
Question from the official GATE 2017 ME paper (Set 2), IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.