PARIXO GATE · ME Open the app

GATE 2018 ME Set 2 · Question 60

2 marksNumerical answerManufacturing EngineeringCasting: Patterns, Moulds, Gating and Solidification

For sand-casting a steel rectangular plate with dimensions , a cylindrical riser has to be designed. The height of the riser is equal to its diameter. The total solidification time for the casting is . In Chvorinov's law for the estimation of the total solidification time, exponent is to be taken as . For a solidification time of in the riser, the diameter (in mm) of the riser is ________ (correct to two decimal places).

GATE 2018 · Mechanical Engineering · Set 2 · IIT Guwahati · printed as Q.50 in the ME section

Answer
42 to 52

From the official answer key published by IIT Guwahati.

Worked solution

According to Chvorinov's rule, total solidification time is:

For the rectangular plate casting of dimensions :


For a cylindrical riser with height equal to diameter ():
Assuming all surfaces cool (side riser):

Using Chvorinov's law ratio:

*(Note: If considered as a top riser with one insulated base, , yielding , which also lies within the official range of 42 to 52).*

Answer: 51.87

Practise Casting: Patterns, Moulds, Gating and Solidification

34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Casting: Patterns, Moulds, Gating and Solidification

Question from the official GATE 2018 ME paper (Set 2), IIT Guwahati. Solutions by PARIXO AI. All 65 questions of this paper.