GATE 2016 ME Set 1 · Question 59
Heat is removed from a molten metal of mass at a constant rate of till it is completely solidified. The cooling curve is shown in the figure.
Assuming uniform temperature throughout the volume of the metal during solidification, the latent heat of fusion of the metal (in kJ/kg) is ________
GATE 2016 · Mechanical Engineering · Set 1 · IISc Bangalore · printed as Q.49 in the ME section
Answer
From the official answer key published by IISc Bangalore.
Worked solution
From the cooling curve, the metal solidifies at a constant phase change temperature of .
Solidification begins at and ends at .
The duration of solidification is:
Given the constant rate of heat removal , the total heat removed during solidification is:
For a mass of metal , the latent heat of fusion () is:
Answer: 50
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2016 ME Set 1 · Q61A cylindrical job with diameter of 200 mm and height of 100 mm is to be cast using modulus method of riser…
- GATE 2016 ME Set 2 · Q59Gray cast iron blocks of size 100 mm × 50 mm × 10 mm with a central spherical cavity of diameter 4 mm are…
- GATE 2016 ME Set 3 · Q31Equal amounts of a liquid metal at the same temperature are poured into three moulds made of steel, copper…
- GATE 2015 ME Set 1 · Q46The solidification time of a casting is proportional to (V/A )2, where V is the volume of the casting and A…
- GATE 2015 ME Set 2 · Q58A cube and a sphere made of cast iron (each of volume 1000 cm3) were cast under identical conditions. The…
- GATE 2015 ME Set 3 · Q17In full mould (cavity-less) casting process, the pattern is made of
Question from the official GATE 2016 ME paper (Set 1), IISc Bangalore. Solutions by PARIXO AI. All 65 questions of this paper.