GATE 2017 ME Set 1 · Question 54
A sprue in a sand mould has a top diameter of 20 mm and height of 200 mm. The velocity of the molten metal at the entry of the sprue is 0.5 m/s. Assume acceleration due to gravity as and neglect all losses. If the mould is well ventilated, the velocity (upto 3 decimal points accuracy) of the molten metal at the bottom of the sprue is ________ m/s.
GATE 2017 · Mechanical Engineering · Set 1 · IIT Roorkee
Answer
From the official answer key published by IIT Roorkee.
Worked solution
Applying Bernoulli's equation between the top (entry, point 1) and bottom (exit, point 2) of the sprue, neglecting losses and considering the mould to be well-ventilated (atmospheric pressure at both ends):
Since and taking the bottom as the datum (, ):
Substitute the given values: entry velocity , , and :
Answer: 2.042
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2016 ME Set 1 · Q32The part of a gating system which regulates the rate of pouring of molten metal is
- GATE 2016 ME Set 1 · Q59Heat is removed from a molten metal of mass 2 kg at a constant rate of 10 kW till it is completely…
- GATE 2016 ME Set 1 · Q61A cylindrical job with diameter of 200 mm and height of 100 mm is to be cast using modulus method of riser…
- GATE 2016 ME Set 2 · Q59Gray cast iron blocks of size 100 mm × 50 mm × 10 mm with a central spherical cavity of diameter 4 mm are…
- GATE 2016 ME Set 3 · Q31Equal amounts of a liquid metal at the same temperature are poured into three moulds made of steel, copper…
- GATE 2015 ME Set 1 · Q46The solidification time of a casting is proportional to (V/A )2, where V is the volume of the casting and A…
Question from the official GATE 2017 ME paper (Set 1), IIT Roorkee. Solutions by PARIXO AI. All 65 questions of this paper.