GATE 2013 ME · Question 16
A cube shaped casting solidifies in . The solidification time in for a cube of the same material, which is 8 times heavier than the original casting, will be
- A
10
- B
20
- C
24
- D
40
GATE 2013 · Mechanical Engineering · IIT Bombay
Answer
From the official answer key published by IIT Bombay.
Worked solution
According to Chvorinov's rule, the solidification time is proportional to the square of the modulus (volume-to-surface-area ratio):
For a cube of side :
Thus, .
Since the material is the same, mass is directly proportional to volume (). A casting that is 8 times heavier has 8 times the volume:
Using Chvorinov's relationship:
This yields 20 min (Option B). However, in the official evaluation, this question was dropped and marks were awarded to all candidates.
Answer: Marks to all (the question was dropped)
Practise Casting: Patterns, Moulds, Gating and Solidification
34 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Casting: Patterns, Moulds, Gating and Solidification
- GATE 2026 ME · Q30In relation to metal casting defects, match the following | Defect | | Description | | | :--- | :--- | :---…
- GATE 2025 ME · Q34A liquid metal is poured in a mold cavity of size 200 mm × 200 mm × 200 mm. The cooling is uniform in all…
- GATE 2025 ME · Q38Match the mold elements in the casting process with the most suitable function | Mold element | | Function |…
- GATE 2025 ME · Q62Two metal parts (a cylinder and a cube) of same volume are cast under identical conditions. The diameter of…
- GATE 2024 ME · Q31The allowance provided to a pattern for easy withdrawal from a sand mold is
- GATE 2024 ME · Q61Aluminium is casted in a cube-shaped mold having dimensions as 20 mm × 20 mm × 20 mm. Another mold of the…
Question from the official GATE 2013 ME paper, IIT Bombay. Solutions by PARIXO AI. All 65 questions of this paper.