PARIXO GATE · ME Open the app

GATE 2019 ME Set 1 · Question 45

2 marksMultiple choiceManufacturing EngineeringMechanics of Orthogonal Metal Cutting

In orthogonal turning of a cylindrical tube of wall thickness , the axial and the tangential cutting forces were measured as and , respectively. The measured chip thickness after machining was found to be . The rake angle was and the axial feed was . The rotational speed of the spindle was . Assuming the material to be perfectly plastic and Merchant's first solution, the shear strength of the material is closest to

  1. A

  2. B

  3. C

  4. D

GATE 2019 · Mechanical Engineering · Set 1 · IIT Madras · printed as Q.35 in the ME section

Answer
(A)

From the official answer key published by IIT Madras.

Worked solution

In orthogonal turning of a tube, the width of cut is the wall thickness , and the uncut chip thickness is the feed per revolution:

The chip thickness ratio with deformed chip thickness is:

The shear angle is obtained from the rake angle :

Given cutting force and feed force , the shear force is:

The shear plane area is:

Thus, the shear strength of the material is:

Answer: (A)

Practise Mechanics of Orthogonal Metal Cutting

27 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.

More from Mechanics of Orthogonal Metal Cutting

Question from the official GATE 2019 ME paper (Set 1), IIT Madras. Solutions by PARIXO AI. All 65 questions of this paper.