GATE 2022 ME Set 2 · Question 55
In an orthogonal machining operation, the cutting and thrust forces are equal in magnitude. The uncut chip thickness is 0.5 mm and the shear angle is . The orthogonal rake angle of the tool is and the width of cut is 2 mm. The workpiece material is perfectly plastic and its yield shear strength is 500 MPa. The cutting force is _________ *(round off to the nearest integer)*.
GATE 2022 · Mechanical Engineering · Set 2 · IIT Kharagpur
Answer
From the official answer key published by IIT Kharagpur.
Worked solution
Given , uncut chip thickness , width of cut , shear angle , rake angle , and shear strength .
The shear plane area is:
The shear force along the shear plane is:
From Merchant's circle relations:
Since :
Using the trigonometric identity :
Substituting :
Answer: 2732
Practise Mechanics of Orthogonal Metal Cutting
27 GATE questions from this chapter, in short untimed sets, with the formula sheet beside them. Free.
More from Mechanics of Orthogonal Metal Cutting
- GATE 2021 ME Set 1 · Q48An orthogonal cutting operation is performed using a single point cutting tool with a rake angle of 12° on a…
- GATE 2021 ME Set 2 · Q50In a pure orthogonal turning by a zero rake angle single point carbide cutting tool, the shear force has…
- GATE 2020 ME Set 1 · Q55In a turning process using orthogonal tool geometry, a chip length of 100 mm is obtained for an uncut chip…
- GATE 2020 ME Set 2 · Q53A cylindrical bar with 200 mm diameter is being turned with a tool having geometry 0° - 9° - 7° - 8° - 15° -…
- GATE 2019 ME Set 1 · Q45In orthogonal turning of a cylindrical tube of wall thickness 5 mm, the axial and the tangential cutting…
- GATE 2019 ME Set 2 · Q64In an orthogonal machining with a single point cutting tool of rake angle 10°, the uncut chip thickness and…
Question from the official GATE 2022 ME paper (Set 2), IIT Kharagpur. Solutions by PARIXO AI. All 65 questions of this paper.